Was this issue soreted? I have an identical fault code, says signal too high, pressure readings are 6hpa at idle, 33hpa at 2000rpm. I have had an analogue pressure meter connected in place os the pressure sensor, and the readings are correct. While driving, it will suddenly go into limp mode, and remain until fault cleared. I am assuming, wiring fault, or the ECM fault. To swap this I assume it would have to be programmed at volvo?
Cheers
__________________
Hugh
'01 S40 T4 S With Prins VSi LPG - '03 V40 T Sport Lux With Prins VSi LPG - '05 C70 T GT (Auto) With Prins VSi LPG - '09 XC60 D5 SE (Auto) - '12 V50 SE Lux Drive.
|