Quote:
Originally Posted by Beadybc
Had a look into the tube where the screw sits and it was filled with a few mm of fuel, is this normal? I tried turning it but it's fixed solid so the 3mm allen key is just stripping the head. WD40 time or will warming it up first loosen it?
|
Shouldn't be any fuel in the tube, also the Allen key should turn it fairly easily.
I'm not a fan of WD40 as a penetrating fluid, i prefer a 50/50 mix of acetone and synthetic ATF. I'm wondering if it was in fact water that was in that tube and it's partially seized teh adjuster?