ah ha the map sensor is in two parts, one is mounted on the rad intake, right at the front of the engine(two weak ass plastic crews and a wee sensor and another identical one is on the intake manifold but to get to that you need to take apart the plastics and is inbetween i think 3 and 4 intake, whip it out and give it a wee clean up and swap it with the one from the front of the engine, and the prob will dissapear it did with mine with the same code, i will get you some piccys,
the baro sensors only come in to play unless you are in the mountains it comapres the pressure between ambient and manifold to assume fuel mix, i will sprt som pics out when i get a chance to take some
|