before you start unbolting anything else, remove the centre bolt, get a suitable drift or right sized socket and hit the end of the shaft. if it moves, it moves, if not you're not stuck with the whole thing in bits
mine were both easy when I did it
what I didn't do was pull the whole shaft out from the gearbox and THAT is the bit that has to be done right, so definitely check out some advice on that before you just start pulling the shaft
__________________
V70 '01 auto petrol 2.4 (140) 70k
-------------------------
mini project - link
Last edited by stuart bowes; Jan 24th, 2022 at 18:24.
|