DISSASEMBLY (CONT'D)
2) Remove the lower cushions of the rear seats. This is done by folding them upward (as though to fold down the seat backs), and then giving a sharp tug straight up. (I had no idea this could be done! Very cool.)
3) We need to access the hole in the bulkhead, through which the pbrake cable passes. So, loosen (or remove) all three lower cushion brackets, and peel back the carpet (and reinstall brackets so they don't get lost).
Here is a view from the front seat facing backward. You can see the pbrake assembly, and the hole and rubber grommet are just visible.
4) Disengage the pbrake cable from the handle (there is a small metal tab that is folded up to allow the cable end to disengage).
5) Unthread the plastic nut from the metal housing, then push the female portion through to disengage the cable from the housing altogether.
6) Starting in the back seat area, pull the brake cable backward under the carpet until it is all exposed at the bulkhead area.
