Thread: Engine: 2.1 Carb B21A: - PCV System with aftermarket Webers Help please.
View Single Post
Old Sep 14th, 2019, 14:16   #17
spease1984
New Member
 

Last Online: Feb 2nd, 2020 20:03
Join Date: Jun 2019
Location: Maidstone
Default

I am not sure what modifications have been done to the cylinder head bit it's not the original that's for sure it's date stamped 84 and the previous owner told me it had been ported and polished.

Regardless this is to be a daily driver and with the twin webers I would be lucky to see 20mpg, they would go out of sync more often then I would have the interest to balance them and I couldn't work out how to get the choke cable to pull on both carbs.

So they are off the car now and a single weber which arrived yesterday is going on.

I've set the advance cure to same Bosch number as the old distributor and I'll see how I get on. Assuming the 123 distributor can be connected to the vac port on the Weber and it doesn't need to come from the manifold?

As for modern petrol it's horrible stuff. Stinks gives me a headache and rots rubber. Wasn't like that 10 or so years ago.
Attached Images
File Type: jpg 20190913_192914.jpg (123.3 KB, 7 views)
spease1984 is offline   Reply With Quote