Well, I done mine yesterday arvo. About 3 hours after i posted up that my lights had'nt come up on the dash for a couple of days...They came on..!
Took me about 2 hours from start to finish...Done all the ones in the piccy that Jamie done...Soldering took about 3/4 of an hour. Just put a new little blob on each joint, easy to do. Worst bit was cutting the Lid off the ABS unit.
Put unit back on the car (after the Silicon had dryed) and took for a test drive.
Started the car and the lights stayed...got up to about 20mph while its checking the system...Lights went off and now stay off, only coming on for a couple of seconds when you first turn on the Ignition.
So hopefully all cured. DB.
|