Quote:
Originally Posted by VOLVOBOY
Hi.
The guy in the vid made things a lot more difficult than they needed to be.
There is no need to remove the cooler rad or intercooler.
Remove the plastic under-skirting as he has in the vid.
Remove the electric cooling fan and the intercooler pipes to give access to the rad-pack fixing bolts . ( 4 bolts that pass thru all three coolers ) Back these off just enough to release the condenser. Use tie-wraps to hold the rad if needed.
Remove the oval-shaped air-dam in front of the condenser. ( there are just two plastic pins - the centre pin type that you press in to release.)
Release the connecting pipework and remove the receiver/drier.
Slide the condenser down and out.
|
Hi does it make life easier if the bumper is removed for access?