[lnparry]

Hi all,

Reference the mesh grille that sits between the bonnet and the windscreen on my '97, 945. The surface panel has a series of longitudinal slots cut into it with (in my case) a black, diamond-mesh below it. One end of the mesh has come loose and sags down allowing all the autumn leaves to disappear below no doubt to clog drain holes.

Presumably this is a tricky one to fix from below (behind the dash?) so does anyone have any clever fixes? I'm thinking maybe tiny cable ties or colour coded garden wire to fix the mesh to the slots above but neither will look neat so open to suggestions.

Thanks for reading.

Cheers,
LeeP