Quote:
Originally Posted by Laird Scooby
You could try it and also check the operation with the test box as Kay suggests but i've a funny feeling that after adjusting it, it will show as working correctly.
If so, as we've checked everything else and this is more or less a double-check of the TPS (which we've already done by disconnecting it so it would have revved above 3k if the TPS had been stopping it) that only leave the ECU as being the faulty.
Unless Kay can come up with any other suggestions after reading it, i'm all out of ideas.
|
With tps unplugged it’s constant 2000rpm on idle. And revs to 6000rpm. So it’s tps problems right. Didn’t I mention that previously in this thread? If not I’m sorry? I adjusted tps to 0,15mm
Still not much difference in idle performance. Though I have cleaned the throttlebody
Then I can adjust the idle on throttlebody then right?