After popular demand. Some pics of fitting a HID conversion.
Earthing -
1. This is the negative end from the ballast of the HID ballast. It plugs into the negative of the H7 bulb connection.
2. This is where it connects into. Incidentally the brown is the negative point from the original H7 bulb connection.
3. Pictures 3 and 4 are of the earth connected to the negative leads going into the original H7 bulb connection. You can see the earth wire in the 2nd picture better.
4. With the leads coming out of the light. I drilled a 25mm diameter hole for the plug where the wires come out.
5. The other end of the earth and where it was attached.
6. This is the unit out. It is wrapped in insulation foam and tie wrapped to the ballast.
7. In the final positions. Tucked into the cavities. Perfect fit!
