I was committed to makita with other tools so that's where I looked.
Have the C1002 half inch drive, 1100Nm tightening torque, 1600Nm knock off. £400 for the full kit, 2 5Ah batteries and rapid charger.
Also baught a Z285 as it's smaller and easier to use. 280Nm tightening 450 Nm knock off as a bare unit.
Have yet to find a bolt the C1002 has failed on and often the results are a nut spun off that is too hot to handle. The Z285 is a fabulous tool within its range and with big brother to back it up is a very useful addition. The C1002 is a big machine, vary capable but needs the room to use it.
I have had the cheaper ones and while they did a job they do not compare to the makita.
Paul.
|