Check the cable release under the steering wheel, there's a red/orange clip in there that pops out if it's not fully home it won't release the key &/ gear shift had the issue a while ago and managed to sort it.
See photos below. you'll need to remove the casing around the steering column. Photo three shows the cable clip inserted fully the tang clips into the sq hole. squeeze the lever of the orange clip and insert it fully
PS the position can be adjusted by adjusting the threaded end at the gear shifter, if it's slack in any way.
Hope this helps.
Last edited by seandodwell; Apr 14th, 2024 at 17:30.
|