Hi, so long as you don't have an exhaust each side, you should be able to fit the space saver wheel the rest of us have. There are loads for sale on the bay and you should be able to buy a decent one without too much rust.
They get that was as they can easily be left and never used.
They are suspended on a cable assembly which is raised and lowered by a spigot in the center of where you will see the wheel would locate.
You need to check if this assembly is there still.
It is raised and lowered by a crank handle you should find on your jacking kit under the floor in the boot.
Details are in your user manual, mine is on page 126 'Chainging wheels'.
Hope this helps
John l
|