Quote:
Originally Posted by martin93
Also, phase 1's didn't have a VVT system, but the 1.5's did.
|
True.
Quote:
Originally Posted by martin93
And if it is actually sucking, the last thing you want is latex being wrapped round a camshaft. Just gently lay the cap back on without latching it. If, as you're placing the cap on, you feel a very slight pull, and/or if the cap stays there without it blowing oil out the sides, then it's fine.
|
True. I've never had any success with this stupid glove test either.
The PCV isn't complicated, and it doesn't even have a valve at all, it's simply a clear void between several bits of engine and the inlet manifold. The manifold sucks and draws the vapourous gases, where either condensate oil is returned by gravity to the sump or gets burned in the cylinders.