Quote:
Originally Posted by arcturus
I have sourced all the components required including wiper motor. I have been informed that the 12V starter won't fit. not sure if I can swap a solenoid from a 12v. They look as though they are permanently attached. Would the 6v solenoid burn out? Is there a way round this?
|
Have you sourced a 12V dynamo? If not, consider a Dynamtor :
https://simonbbc.com/charging/dynamator/
It will give you an alternator output from a dynamo shaped component, retaining the original looks but giving you the output you need to keep everything charged.
Would i be right in thinking you're converting to negative earth as well?
To answer your question about the starter solenoid, i'd strongly advise changing it to a 12V solenoid, the starter motor you'll probably get away with but if you can find a 12V one that will fit, use it! Failing that, get yours converted to 12V ideally.