I would only take either one of below options. The other sound a bit riscfull
Originally Posted by Clifford Pope View Post
There are several ways:
1) special tool that clamps pulley
4) Impact wrench with air line
6) Cheat - cut slit in lower plastic cover so that you can remove it, leaving the pulley in situ.
Definitely NO GO...
2) big socket on nut, wedge long breaker bar against the chassis, give a quick flick of the starter motor
3) Put in 4th gear, handbrake on, try turning breaker bar by hand, or giving it a wack with a hammer
5) Rope trick - feed string into a plug hole, wind crank so that the piston is locked. Remove string afterwards!
But realize it took me with my limited skills in welding to make below in half an hour. Luckily we had some suitable sizes of metal in the trashbin.