Quote:
Originally Posted by eternal optimist
Excuse my ignorance, but can you use the cleaning and reseating tools with the head in situ?
|
I dunno, used the puller and cleaning kit only. Luckily it was a small amount of oil sludge in the injector manholes origin were the rocker cover gasket and silicon gasket failure and leaking.
I removed the rocker covers, clean them and replace the gaskets and resealed the top cover. the injectors partial assembled the nozzle tips cleaned by the ultrasonic cleaner. replaced the copper washers and install recon high-pressure pipes when 3 of 5 were the pipe surface damaged by top plastic engine cover. All together was 2,5days only and an awful lot of mess.