I had to do this job a few years ago and found that the hydraulic press was useless.
I ended up using an all-thread bar, 2 nuts that threaded onto the bar and 2 flat plates with holes in them to place either side of the torque rod, then lubed it all up with the supplied silicone grease and tightened it together.
__________________
96 945 Classic 2.3 LPT with some mods...
To do: Install upper brace, Catch can, install sound deadening (50% done), Fit electric leather seats, repaint! List is endless...
16 BMW 330e
Last edited by Chooch84; Jan 13th, 2021 at 18:38.
|