View Single Post
Old Nov 16th, 2019, 10:12   #28
arcturus
arcturus
 
arcturus's Avatar
 

Last Online: Today 09:21
Join Date: Mar 2006
Location: Sagres Portugal
Default

No thrust as far as I can see. Should be able to lift out crank this weekend and do full inspection.On The bore.This morning I pushed a ring right down to the bottom of the bore where should be little or no wear. The ring clearance barely changed.This leads me to believe that the rings are more worn than the bore. I will check further later. Is my reasoning correct?

Things are looking brighter so far. The crank and big end journals seem to be within tolerances when checked with digital caliper but will try to get hold of a micrometer this week end to verify.
__________________
life's too short to drink bad wine

Last edited by arcturus; Nov 16th, 2019 at 10:53. Reason: more checking done.
arcturus is offline   Reply With Quote