[Arash79]

Hi guys,

I'm new to this forum and just thought I'd ask you guys about some problems I'm having with my Volvo xc90 after a transmission fluid change.

I used the fill drain method and drained and filled the transmission oil 3 times. I replace the level plug and screw with a new one and also replaced the O ring and washer.

I used VIDA DICE to check the fluid temperature and when it reached 50 degrees I then removed the torx screw with the engine running to set the right fluid level by letting it drain.

The only thing I did wrong was to turn the engine off during setting the fluid level as I thought it may pump all the fluid out.

I then replaced the screw and took the car for a drive.

The car was driving fine but now the transmission sometimes fails to engage gears between gears and the revs reach about 4k rpm then the gear engages with a hard cluck.

I used Castrol transmax multi vehicle for the oil which is rated for Asin Warner 3309 transmissions.

Any help will be appreciated

Cheers