Quote:
Originally Posted by AJC30
My C30 is a 2009 1.6D R-Design and the washer tank with the two pumps fitted is located directly under the filler cap and is easily accessed by removing the front wheel and the wheel arch inner covers you will see the tank fitted against the bulkhead of the car and not behind the front bumper/fender.
Should it be the washer jets not working they can be pulled out to the spray position and using a small screwdriver released by lifting the locating latch then try the washers to prove water gets to the nozzle outlet if it does its a blocked or faulty nozzle needing a clean or replacing.
Hope this helps
|
So levering them up from their resting position with a plastic lever or something will not damage them?