Quote:
Originally Posted by myshed
Thanks for the responses.
Have tried scrappies, but nothing locally (30m radius), have had REALLY bad experience with "scrappy brokers" like Partsgateway so reluctant to use again, Google nowt, ebay loads but no success with NSR, hence my question - is there another vehicle's belt I could use?
The "buttons" are the same as those fitted and which fell off during the test; suggested to examiner that replacement could be fitted, but he was adamant that belt was damaged & would not pass re-testing, therefore MoT failure. So,
only apparent option is to replace whole belt - unless someone has another suggestion?
|
You did not fit the button properly if it fell off , it is a 2 part button with a pin in the middle which goes through the second part on the back , you are supposed to use a soldering iron to melt the end of pin down to secure it all together , it should be fine then .