The "lamps" in the Switch are LEDs.
You will need to open up the switch and run wires from the switches LEDs to other LEDs placed where you want them to be.
Either the switch LEDs and the external LEDs in series, and modify the series resistor slightly to adapt for the extra voltage drop.
Or in parallel with your own current limiting resistors.
As LEDs use f-all power, there will be no issues with extra "load"
Electronic and Soldering skills required.
__________________
XC90 R-Design MY2009, Black Sapphire Metallic. HP-Sound, RSE, Nav, Tel, ParkingCam, BLIS, ParkingHeater, RestHeat, Removable Towbar, Summer: CRATUS 20x8 on Pirelli Scorpion Zeros 255/45, Winter: NEPTUNE 17x7 on Continental WinterContact 4x4 235/65.
|