I forgot to say the tool in the post above is meant to do the same job as SVO 2394 (a circular affair shown in chapter 04.6 in the workshop manual)
The distance that the case needs to be stretched is between 0.13 and 0.2mm
I'm hopeful that the hardware I've chosen to use is going to be up to the job
I've just got to find a way of squashing the DTI further into the casing to make a direct measurement of the stretching - this is very important to get right because if you go past the 0.2mm there is a chance that you exceed the elastic limit of the casting and deform it
|