View Single Post
Old Sep 24th, 2012, 19:04   #30
Adi2727
Flying Transylvanian
 

Last Online: Jan 31st, 2023 16:32
Join Date: Apr 2009
Location: Brasov
Default

Firs of all, this is a temporary solution, in order to move the car from radio interferences or just to see if it's working.

Start by removing the electro-valve from the fuel tank. This is connected to the immo, so if the immo doesn't work, fuel wont pass trough.
Is looking somehow like that:


Second, remove fuse no.10


Third: connect a cable from "+" battery the the start/stop solenoid


4. because glow plugs wont work with this solution, pump a few times on the fuel filter pump.


5. You can try to start the engine. Give a few attempts because sometimes doesn't work from the first time.

The remote won't work and if you want to stop the engine first of all disconnect the cable from the battery.

As a permanent solution i would recommend you to fix the immo.
Otherwise you will have to make a circuit connected to contact switch and to all other start inhibitors (starter, glow plug relay, etc). You will have to gave them 12V.
Also, the electro-valve from the fuel tank, to be replaced with a regular "one way" valve or you'll have to use the pump from the filter each morning.

Best,
Adi
Attached Images
File Type: jpg electrovalve.JPG (32.9 KB, 30 views)
File Type: jpg fuse 10.jpg (61.4 KB, 31 views)
File Type: jpg start stop solenoid.jpg (76.2 KB, 30 views)
File Type: jpg filter pump.jpg (74.7 KB, 30 views)
Adi2727 is offline   Reply With Quote