View Single Post
Old Nov 4th, 2019, 13:21   #7
SteveP
300 Maniac
 
SteveP's Avatar
 

Last Online: Mar 27th, 2024 15:56
Join Date: Nov 2002
Location: Coventry
Default

Which model 240 did you try the crank pulley from? Your early 360 GLT will be fitted with a B19E engine, it could be that the 3 belt crank pulley you tried from a 240 was from a B200/230 series engined car and the crank is different.

I suspect you'll want to source a 3 belt crank pulley from a 240 equipped with a B21/23 engine and PAS - assuming they exist?

There are some aftermarket sources producing aftermarket lightweight crank pulleys if you're not able to source a good used example, for example here: https://shop.klracing.se/sv/artiklar...-8v-3spar.html

Would be worth dropping them an email to check it will fit a 360, the only potential issue I could forsee is if the pulley is deeper than the original as there's less clearance between the pulley and radiator surround panel in a 360.

Last edited by SteveP; Nov 4th, 2019 at 13:27.
SteveP is offline   Reply With Quote