Quote:
Originally Posted by Laird Scooby
You have a 5V feed and an earth on the CPS? Why are you expecting to see a 12V feed as well? The third pin is the output.
|
Was just following the non start flow chart from here and its a b230ft and says i should expect 12v on the red bire 5v on the blue wire.
The fuel pump is being powere i have the cap off the control relay and can here it pump and can force it to pump through that relay.
I have no idea if it is just being immobilised not sure how the system works whether its fuel or spark related.
I may try and swap out the power stage and see if that will give me the spark back