Quote:
Originally Posted by nhf117
There is a pressure valve on the hydraulic pump. When you pull the wire to relief the pressure the valve opens but after you release the wire the valve won't close by itself. You need to get to the pump and manually push back the latch at the end of the wire. Now as the valve is closed again you need to press the close roof button to build up pressure in the system. Keep the button pressed until you get the message 'roof closed'. After that, everything will be back in normal . No error message and the roof will be secured and tight.
|
Aha! Thank you. That might just be the puppy. So where is that pump please?