Choke cables
Ron, thanks for the info. I was trying to find the least messy way that works to literally pour the thinned grease. It seems the inner piano like wire is such a tight fit in the wire tube. My missing black sheath is under the dash near the clamp on only one cable. To put shrink tube on I slit it and put three layers around the wire tube then put the clamp on and heated it. The wire tube/coil still slides. Do you think it would work to remove the sheathing on the other wire to have the clamp gripping the same size tube, even though it would be the metal tube on both cables? The only way to possibly do a better installation of the shrink tube would be to slide them from the carb end all the way to the inside clamp and it would have to be large enough to slide over the black sheathing to start. A lot of effort if not a good result! Just like this is a lot of typing for a problem of this sort!
|