I found it next to impossible to remove the glass from the motor without breaking the motor mechanism. Others have said it is possible with a small sharp screwdriver and/or pokey things to dislodge the clips from the motor. However you don't really need to remove the glass for spraying.
Removing the housing from the door is relatively easy but the internal triangular covers are also prone to breaking. I also broke both of mine as the force needed to seperate push in studs is more than they could handle. Spraying in some lubricant (WD40) to the 2 stud holes after prising up the cover might help.
After that its a few screws that should come out easily from the Aluminium base plate and a connector.
|