Quote:
Originally Posted by Clan
Yes the terminal repair is a piece of wire with an improved terminal on the end , You need to press a thin narrow flat blade into the release slot in the terminal housing to release the terminal from the housing . If you do not have injector signal fault codes this is unlikely to be the problem .
|
Hi,
I finally found the paperwork with the error codes:
ECM-23B0 Injector Cylinder 2 - Singal Missing - DTC is Found Active.
So I think the repair piece of wire is my first starting point. I have done the release a couple of times before on VW Terminal Housings, it sounds like the same process
Soldering irong and Heat Shrink it is then...