Swap the injectors about, you might have a blocked injector. It's a bit of a messy job, especially if the fuel rail is still pressurised (release the pressure using the valve found at the bottom of the fuel rail). You could also check the resistance of each injector. Assuming you have the original 0 280 150 804 injectors, resistance should between 2-3 ohms per injector.
If you're going to remove the injectors, it would be worth flashing a torch into the tops of them to see if the filter basket looks clogged.
__________________
96 945 Classic 2.3 LPT with some mods...
To do: Install upper brace, Catch can, install sound deadening (50% done), Fit electric leather seats, repaint! List is endless...
16 BMW 330e
Last edited by Chooch84; May 29th, 2020 at 17:46.
|