Thread: S40 (New) Electrics : - Guide: Replacing the boot wiring harness
View Single Post
Old Jan 22nd, 2017, 17:14   #26
glegalee
Junior Member
 

Last Online: Mar 8th, 2024 23:08
Join Date: Aug 2014
Location: Bridgwater
Default

After few weeks of the "Boot Lid Open" message and the hazard lights failing to flash upon locking the car, I finally remembered to do some research on what to repair/replace on my S40 to make this go away. Thanks to the original poster of this thread, I found it most useful and it quickly pointed me in the right direction. I Found that the signal cable from the normally open contact on the boot lock mechanism was severed where it entered the rubber duct from the lid. I also noticed that the insulation on a second wire was brittle and damaged in 2 places. I decided to repair the damaged cables instead of replacing the loom, and I am pleased to say that due to this thread I have fixed my car. Well, this fault anyway. Plenty of other quirks to sort out yet but I'm on the way. Cheers G.
glegalee is offline   Reply With Quote
The Following User Says Thank You to glegalee For This Useful Post: