Quote:
Originally Posted by MarvinMitt
Every time I change fuel filter I also test the intank pump.
Tray under, filter off and ignition on. If fuel comes then pump is ok.
10-15 times ignition on for 20 seconds would be enough to prime the fuel lines.
Try a little more but if this doesn't help I would remove the filter again and check if fuel is pumped to the filter when ignition is on.
|
I just took the filter off again to check my work and the housing had diesel in it, so would suggest that the pump is fine. Do you think maybe I should put some more diesel in the tank and try again or just keep priming it?
Sorry for the slightly desperate nature of these posts but only half of my car fits under my parents car port and every time I sit in the drivers seat I am getting soaked! Very frustrating