Quote:
Originally Posted by P156KWJ
Cheers for that, gives a lot of insight compared to the Haynes manual! The warped discs were a bit of a concern as of course you'd expect there to be an underlying cause for it.
We usually use copper grease for the buses but I'll consider buying something more specific. Thanks again for your insight!
|
You may want to check run out on the front hubs. I went through three sets of discs before I finally figured out that the hubs were out of spec for lateral run out. Two wreckyard spindles and ANOTHER set of rotors did the trick.
__________________
2003 V40 1.9T B4204T4, 197,000miles (sold but alive!), 2004 S60 2.5T, 160,000miles, 2010 V70 3.2, 125,000miles, 2002 V70XC 2.4, 175,000miles
Click here for my x40 and V70 P3 repair guides
|