Quote:
Originally Posted by Kev0607
I forgot to note that it seems to be popping off from the stepper motor side, i.e. the ball joint nearest the front of the engine. The other end towards the back of the engine is still attached. I already modified that bit before with some wire wrapped around it, seems to be holding.
|
In that case I’d suggest wiring the front part. The repair kit was for the other end. If the ball is worn on the motor then it’s a new motor. The ball is pressed into plastic and not available on its own as far as I know. You say you have replaced the plastic arms already so there isn’t really anything else to it.
__________________
Previous -03 S40, 04 V70 D5, 04 V70 D5 Sport, 05 V50, 07 S60 D5, 09 V70 D5 R design, 12 XC60 DrivE, 15 V60 D3
Current- 05 XC90 D5 Exec, 12 XC70 D4 AWD Se Lux, 14 S80 D3 Se Lux
|