The minimum voltage value was taken from torque app using OBD connector. I guess this is the value present in the front fuse box and reported through ECM. The voltage level at the starter can be lower because you have an aditional cable from the fuse box to the starter. Anyway if it's already bad at the fuse box when trying to start the engine, maybe the end lead to the starter shouldn´t be the problem. I will try to put back the original starter to see if the behavior is the same. The new starter I've fitted it's equivalent, it also has bosch reference printed, but it is not from bosch. It was a lot cheaper than the original, so maybe the quality is not the same.
|