I can’t either, didn’t realise at the point of purchase. By the time I got them they needed fitting to pass the MOT, after that time took its toll. I didn’t have a lot of money at the time but now I have a better job I’ve bought far better items.
In theory the Anodising should have protected against corrosion but in just fitting with a press fit it’ll damage the anodising as it’s usually only microns thick anyway.
The Aluminium had to be cut out as it was crumbling that much I couldn’t get them to press out.
__________________
940 B230FT
Last edited by Jimsiss; Sep 2nd, 2022 at 11:22.
|