Thanks Symes,i didn't check the values,but i will do,i did unplug the sensor and connected a multimeter to the 3 terminals and with ignition off no readings and also non when doing a continuity check between all 3 wires,however with ignition on i got readings on both end connections see pic-lhs-4.94V and rhs-4.97V,so does it sound like there is some sort of short between these 2 wires,i've checked the plug and it seems fine,maybe that's why it's not letting me do the adaptation even though it states-'this is initiated'
Last edited by sv70; Mar 31st, 2019 at 15:09.
Reason: pics
|