Volvo Owners Club Forum - View Single Post - Polished Al. bonnet scoop for hot rod, kit car, V8

240ratrod · Apr 3rd, 2019, 19:05

Polished Aluminium Shotgun bonnet scoop.

I purchased this with the intention of using on my Volvo. This is not a V8 car so I was going to mount through the bonnet attached to the strut tower brace. Then route the standard intake up to the intake utilising the included air filter. My plans changed so this is no longer needed.

This can be used as a functional or decorative addition on any car, hot rod, race car, kit car, dragster or truck. I imported it from the USA brand new from a hot rod builder contact, it has never been fitted just unboxed and reboxed! It has the rotating butterflies and link arm, mounting plates, filters and fittings.

Details from supplier:

- POLISHED ALUMINIUM FINISH WITH FINNED TOP
- SUIT 1 X 4 BARREL CARBURETTOR OR 2 X 4 BARREL CARBURETTOR
- INCLUDES BASE PLATES FOR CARBURETTOR ATTACHMENT, 2 AIR FILTERS, BOLTS, AND BUTTERFLY'S

- WILL FIT MOST STOCK AND AFTERMARKET CARBURETTOR WITH 5-1/8" NECK LIKE HOLLEY, EDELBROCK, CARTER, ROCHESTER & QUADRAJET FOUR BARREL CARBS

DIMENSIONS: 50 CM LONG X 24 CM WIDE X 13 CM HIGH

NOTE: LINKAGE FROM CARBURETOR TO BUTTERFLY'S TO MAKE THEM MOVE NOT SUPPLIED

It's boxed ready for delivery by courier or collection welcome.
Listed at £125. Talk to me, my ears are open!
Thanks, Matt. 07591143388.

Images here:
http://https://drive.google.com/file...w?usp=drivesdk

http://https://drive.google.com/file...w?usp=drivesdk

http://https://drive.google.com/file...w?usp=drivesdk

Apr 3rd, 2019, 19:05	#1
240ratrod Junior Member Last Online: Nov 8th, 2020 11:22 Join Date: Oct 2018 Location: Nottingham	Polished Al. bonnet scoop for hot rod, kit car, V8 Polished Aluminium Shotgun bonnet scoop. I purchased this with the intention of using on my Volvo. This is not a V8 car so I was going to mount through the bonnet attached to the strut tower brace. Then route the standard intake up to the intake utilising the included air filter. My plans changed so this is no longer needed. This can be used as a functional or decorative addition on any car, hot rod, race car, kit car, dragster or truck. I imported it from the USA brand new from a hot rod builder contact, it has never been fitted just unboxed and reboxed! It has the rotating butterflies and link arm, mounting plates, filters and fittings. Details from supplier: - POLISHED ALUMINIUM FINISH WITH FINNED TOP - SUIT 1 X 4 BARREL CARBURETTOR OR 2 X 4 BARREL CARBURETTOR - INCLUDES BASE PLATES FOR CARBURETTOR ATTACHMENT, 2 AIR FILTERS, BOLTS, AND BUTTERFLY'S - WILL FIT MOST STOCK AND AFTERMARKET CARBURETTOR WITH 5-1/8" NECK LIKE HOLLEY, EDELBROCK, CARTER, ROCHESTER & QUADRAJET FOUR BARREL CARBS DIMENSIONS: 50 CM LONG X 24 CM WIDE X 13 CM HIGH NOTE: LINKAGE FROM CARBURETOR TO BUTTERFLY'S TO MAKE THEM MOVE NOT SUPPLIED It's boxed ready for delivery by courier or collection welcome. Listed at £125. Talk to me, my ears are open! Thanks, Matt. 07591143388. Images here: http://https://drive.google.com/file...w?usp=drivesdk http://https://drive.google.com/file...w?usp=drivesdk http://https://drive.google.com/file...w?usp=drivesdk __________________ 1984 240 2.3 turbo Last edited by 240ratrod; Apr 3rd, 2019 at 19:08.