View Single Post
Old Jul 30th, 2011, 13:41   #7
Master Member

Last Online: Feb 15th, 2017 17:45
Join Date: Jun 2007
Location: Aberdeenshire

Prop servicing:

Unbolt either end and centre support

Check the centre bearing for play, if it has play I would send it away for refurb

CV joints remove, clean, regrease and ready to refit the prop

Transfer box, remove, drain oil, check input and output shaft seals, replace if necessary, refill with oil and refit.

The sleeve from the gearbox output to the transfer box input could be worn as could the transfer box. Two options here, replace both or weld the sleeve to the transfer box input shaft
440-Turbo is offline   Reply With Quote
The Following User Says Thank You to 440-Turbo For This Useful Post: