Good afternoon every one,
I had 6805 fault in my Volvo xc90 D5244t 2005 model.
Rear engine mount was shot and quite a lot of engine movement from Drive and Reverse gear.
I've Just came from Holiday from Cornwall with the rear engine mount blocked.
Absolutely no hesitation and no 6805 fault in the whole trip.
I’ve also bought the Jack and axle stands form machine mart.
https://www.machinemart.co.uk/shop/p...ional-garage-j
https://www.machinemart.co.uk/shop/p...C=RV-020110006
Could you kindly please advise me how to proceed with what bolts to remove to loosen the Sub frame and where & how to jack the engine when loosening sub frame to remove and replace the rear mount
This will be great help for me to proceed further. I have Haynes manual and also VIDA but it is not clear (sorry for my stupidity). This will be my first under the bonnet car repair.
I’ve done myself tranny fluid change/ oil change/fuel filter change/parrot device installation/ Rear parking sensors replaced by removing rear bumper/ tranny inline filter, diesel purge, mittyvac vacuum lines.
Please shed me some lights to begin with.
Thank you