Quote:
Originally Posted by Marmitespreader
Try this:
1. Engage the auto-down function and remove fuse 11C/5 (for driver's side) or 11C/4 (for passenger side) (located in the driver's side dash fusebox) during window movement.
2. Install fuse back into position.
3. Engage the auto-up function and hold it engaged for 5 seconds after the window has reached the fully closed position.
4. Verify window is now working properly.
5. If this procedure does not work, a scan tool that can access the Passenger Door Module (PDM) and Drivers Door Module (DDM) will be needed.
--------
The auto up or down function will be engaged if the button is pulled to the second step. The first step is for manual operation. This procedure can be used for driver and passenger windows.
1. Ignition on pos.II
2. With fingers on the fuse puller on fuse#5 (LH door module) initiated Auto-up driver's window with LH door module button.
3. As soon as window reached top (and before it started to auto-down) pull the fuse.
4. Turned off ignition, and waited 30 seconds.
5. Replaced fuse.
6. Ignition back to pos.II.
7. Tried auto-down, did not work, only manual down worked, used manual down to get window all the way down.
8. Tried auto-up, did not work.
9. Got window to top with manual up.
10. Tried auto-down, worked!
11. Tried auto-up, WORKED!
This may also be required:
After step #9, hold the window switch up for 10 seconds before letting go. After completing this step, auto up/down worked but prior to holding the switch up, the auto up/down did not work.
|
Just to thank Marmitespreader
#9 + 10 secs worked
Also to be aware of the fuse numbers
11 in the RHD fuse board is the immobilser not door/window console
It's fuse 5 you need to pull - just check the manual first!