doing it on the cheap
I can confirm that the pattern bushes like Febest VLMB-S60RR will fit the square diesel mounts (as well as the square petrol mounts, for which they are specified).
This is 10-30 Euros vs 100+ for the housing.
This is the bush only (not the housing). You need to drill out the ends of the aluminum rivets from the end plate (7-8mm drill), then put the original plate on after pushing the bush into the housing. It is a tight fit so much easier if you pull the housing. I have pictures if needed but it's fairly straight forward.
Damien
|