Quote:
Originally Posted by oragex
I did replace the gray bellow a few times, it is actually easy but indeed I have the automatic: I had to grease the bellow a little inside to have it slide easier, then pressed on it at one place with the index and the thumb together, then while keeping the pressure I 'drew' a circle with these two fingers (each one goes on one side of the bellow) while crushing the bellow in place
By the way, for hissing one must first make sure the large rubber boot at the bottom of the steering column is properly secured to the floor with a large metal ring - otherwise noises from the engine (hissing) can be heard inside the cabin
|
Mine is an auto .The bellows on mine has quite large slots around the top.So will hear all!!!