Hi,
I bought the Phillips LEDS off Ebay as they are metal, robust and fully waterproof with red and black wires.
You need to locate the sidelight wires which are within the headlight unit and are attached to the sidelights. You then need to put a simple connector block on these wires or solder your black and white wires to them. I assume black is negative(earth) and white is live for your leds. Ideally check with a multimeter which wire is live that leads to the sidelight and the other must be negative.
The pictures below show you the sidelights and wiring.
rgds
J
Last edited by Jonnieb2009; Jan 6th, 2011 at 08:22.
Reason: added text and pictures
|