View Single Post
Old Sep 27th, 2009, 18:30   #1
Laney760
VOC Member
 
Laney760's Avatar
 

Last Online: Mar 18th, 2024 12:17
Join Date: Jul 2008
Location: Henley on Thames
Default

Just found the Volvo Technical Bulletin instructing garages how to emission test cars with HP ZF-22 autoboxes for anyone who's got one:


Volvo TSB 2525, 9/91:

Before beginning the "High Idle Emission Test Sequence" make sure the car is at operating temperature. Place transmission into "park" and switch the ignition off for 30 seconds. Restart, but DO NOT move the selector through the forward or reverse gears before or during the test and DO NOT EXCEED 2000 RPM. The first stage of the test is at 1850 rpm for 30 seconds, the second stage is at normal idle for 30 seconds. If you fail the test and have to do it again, then DO NOT proceed with the programmed catalyst preconditioning test sequence. Abort the test, place the transmission into "park", precondition the catalyst at 1850 rpm for 4 minutes, then allow the engine to revert to normal idle and check the tailpipe emissions. Under no circumstances must you exceed 2000 rpm during any part of the test.
__________________
[IMG]Volvo2 by Strider'swoman, on Flickr[/IMG]

Current '96 945 2.3 lpt - Aurigas, tailgate spoiler, sports grille, lpg fuelled
Previous '88 764 TD, '92 945 TD, '88 745, '81 244 DL
Laney760 is offline   Reply With Quote
The Following 7 Users Say Thank You to Laney760 For This Useful Post: