Quote:
Originally Posted by arcturus
Thanks for brick board reply. Unfortunately there is no way I can get hold of the proper puller. Will have to improvise.
|
As you've shown in some of your pictures, you're not the only "old Volvo" driver in your area so one of them likely has a puller. Even your reasonably local Volvo dealer might have one, especially if they have been in business for a while. Worth asking anyway.
1Pontautos - Portimão
Av. D. Afonso Henriques
8500-668 PORTIMÃO
Telefone: +351 282 426 596
Fax: +351 289 807 980
There are other pullers that work but as said, they have to, in effect, push the tapered shaft out of the hub. I branded this make shift method as dangerous but it would work, all things being equal. Don't say you will want to try it though!
http://www.brickboard.com/RWD/volvo/...um_puller.html
This type can work but the quality has to be high. A fine thread, the Volvo tool has this, is also essential, as this multiplies the torque applied.
http://www.amazon.com/dp/B0002SRH60/...obabertahan-20