So today was a busy one so I didn't get as much done as I would have liked to but I still got a fair amount of work done.
I started doing the cambelt and did the front oil seals but I had forgotten to order a new gasket for the front timing cover so I have had to stop half way through until the gasket arrives.
IMG-20201124-WA0003 by
Luke Ryland -
Flickr2BBcode LITE
Next job was the rocker cover gasket
IMG-20201124-WA0005 by
Luke Ryland -
Flickr2BBcode LITE
Nice new gasket and thoroughly cleaned mating faces.
IMG-20201124-WA0016 by
Luke Ryland -
Flickr2BBcode LITE
I also changed the oil filter while access is very easy
IMG-20201124-WA0013 by
Luke Ryland -
Flickr2BBcode LITE
Then I did the inlet manifold gasket, I forgot to take a photo of the cleaned up mating faces.
IMG-20201124-WA0020 by
Luke Ryland -
Flickr2BBcode LITE
New gasket fitted
IMG-20201124-WA0022 by
Luke Ryland -
Flickr2BBcode LITE
Inlet manifold refitted
IMG-20201124-WA0027 by
Luke Ryland -
Flickr2BBcode LITE
Then I fitted a used fuel pressure regulator as it was missing, luckily I had one in stock! I replaced the vacuum line for it with a good condition used line as it was very perished.